You are not logged in.

#1 2013-10-09 21:43:36

Registered: 2009-08-05
Posts: 23

V4 effects loop?

Is there some way to mod the V4 with an effects loop between the preamp and power section?
Am I wrong in thinking the ext amp outs wont work as a send and return?
Has anyone used the RCA connections from the reverb tank as an effects loop?
Thanks  --Rob in Austin.



#2 2013-10-10 01:54:11

From: Seattle Washington
Registered: 2006-09-04
Posts: 1848

Re: V4 effects loop?

It isn't much of a mod.  You would just need to make one of the ext amp jacks a shorting type jack lift the end of r23 that connects to r21 and r22 and then add another cable from the jacks back to that area... And possibly add a 1.5 meg grid to ground resistor on pin seven of the 12dw7 in case the shorting jack fails.

Pretty strait forward. Don't repurpose the reverb jacks of anything like that.



Board footer

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson