Ampeg V4.com

I got the kit from Fliptops and installed the new caps on my old Ampeg V-4B. Before doing so, I looked around to see if anyone had documented this just so I could get a visual walk through before I did it. Well, I couldn't find anything, but I dove in anyway after reading posts on here and nabbing the schematic. Success.

I went ahead and put an photo-heavy article about it up on my blog. In the interest of helping someone else out who's doing this for the first time like I was, I'm reposting it here.

Pardon if the writing is a bit plebeian; my day job is as a screen printer, not an electrical engineer.

http://doktorsewage.com/operating-theat … 4b-part-2/